10 Best torque wrench of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Torque wrench guide

Torque wrench – it depends on the right turn!
A torque refers to a defined, predetermined suit on a particular fastener. As fasteners, for example, screws or nuts are eligible. The essential of a torque and a given suit is to guarantee the correct fit of the fastener and to exclude a too loose connection and coated connection. On torque wrench is a Toolthat guarantees the right suit.

Torque wrenches are available in many variations, each earmarked. The following types are distinguished:
– triggering torque wrench
– indicating torque wrench
– electronic torque wrench
– electronic torque angle wrench
– mechatronic torque wrench

For triggering torque wrenches, a setpoint is set. If this setpoint is reached, a specific signal is triggered. The signal can be displayed acoustically, optically or chemically. Furthermore, there are triggering torque wrenches, where the signal can be felt. In most cases, the trigger is a click or a chemical color indicator. The latter usually jumps out when the setpoint is reached.

The indicating torque wrench has a readable value indicating the target value to be reached or achieved. The respective torque can be read either on a mechanical scale, via an electronic display or via a dial gauge.

An electronic torque wrench reproduces the current measured value via a display. The displayed value is determined by a specific conversion factor from the strain on the torsion bar. The electronic torque wrench allows you to set several setpoint or reference values.

The electronic torque angle wrench determines the angle in addition to the measured value of the torque, via an integrated gyroscope. The angle is determined only from a certain threshold. As a result, already screwed connections can be detected.

A mechatronic torque wrench measures torque both mechanically and digitally. The measured values ​​obtained are transmitted by radio while the mechanical release indicates the setpoint reached.

Below are some product examples for torque wrenches. In addition to the respective functions, the possible uses are also described.

Torque wrenches – Product examples and their functions

A product example with good ratings is the PROXXON 23349 torque wrench MicroClick MC30. Of the wrenchPROXXON belongs to the triggering torque wrenches. If a certain, preset setpoint is reached, the wrench gives an audible and noticeable signal in the form of a click. The implement is suitable for torques from 6 to 30 Nm and has a 6.3 mm square drive. The wrench has a length of 310 mm and is very light with a total weight of 2 kg.The torque wrench is standardized to ISO 6798 and has an accuracy of +/- 3% is used for fine adjustment and attracts screws of any variation up to M 8 (SW 13 mm).

The torque wrench Unitec 20809 is a product example of an indicating torque wrench. The wrench is often recommended and is used, for example, as an ideal torque wrench for repair work on the car. The implement is supplied ex works with 17 mm, 19 mm socket and an extension and pulls u. a. problem-free and professional wheel nuts and cylinder head bolts. The current value can be read from this displayed torque wrench on the basis of a scale. The adjustment range is from 10 Nm to 210 Nm and the drive is a 12.7 mm square drive.

Torque wrench – conclusion
Regardless of which type of torque wrench is necessary, you should always pay attention to the quality and, above all, the setting range. For fine adjustment, smaller torques are better suited, while certain repair and maintenance jobs require a coarser setting with greater torque. Furthermore, it does not hurt to pay attention to the customer reviews and recommendations before buying. Depending on which work is to be carried out with the torque wrench, recommendations can give tips and suggestions.

[relatedYouTubeVideos relation=”keywords” terms=”torque wrench” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API