10 Best bench drill of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Table drill guide

A bench drill is a precision tool. It consists of the drilling machine, a drill column and a small drill table. Thus, workpieces made of wood and metal can be reliably and accurately drilled. When you buy most home improvement on the performance and idle speed, because these features provide the first impression of the performance of a bench drill , Recommended for the DIY sector machines with a power consumption of about 400 to 500 watts. If you only want to carry out model construction, you can be content with 200 watts. One very important criterion is the span of the drill chuck.

Advantages of bench drill

Do-it-yourselfers usually have a lot of work to do, for example, metal carpet rails or aluminum angles can be machined on workpieces. Theoretically speaking, a metal rail made of stainless steel or aluminum could be marked, grained and drilled with a conventional drill, but this almost never succeeds flawlessly drill„running away“. Here comes the bench drill For use, which drills perfectly precisely the clamped workpiece. Again, the workpiece is marked in advance and pre-grained, after clamping on the drilling table, however, nothing can fail. Bench drilling machines, which can also be called column, boring or column drilling machines, work with accuracies of well under one millimeter and make such work much easier or even possible in the first place. They are permanently installed in the workshop, have a foot and a stand and allow lowering of the drill spindle with a lever. It is therefore a one-spindle vertical drilling machine with fixed mounting on the work table. They are suitable for smaller and medium sized workpieces. The term column or upright drilling machine refers to larger models, some of them are also installed with a substructure on the floor and are then no longer table drills. Advantages of these machines are:

– very accurate drilling possible
– Suitable for all drilling work in steel, stainless steel, aluminum and wood
– By fixing on metals no slipping possible
– easy work

Small disadvantages would be:

– sometimes very expensive
– relatively high space requirement

Buy Bench Drill: What matters?

Bench Drills are available from Bosch, Güde or Einhel, for example. Proxxon offers mini table drills for model making, other major manufacturers include ELMAG, Tools, Flott, Mafell, Pebaro, Scheppach, Silverline and Zipper. Important when buying is the rated power, the idle speed is also considered. The power is given in watts. The speed, which usually can be adjusted continuously, of course, also plays a role. Bench Drills up to 400 watts of power are sufficient for most DIY enthusiasts and are still affordable, they are often much more expensive. But sometimes a home improvement needs 700 to 750 watts. The drilling stroke – the distance of the possible movement – varies on most models between ~ 150 to 160 mm, the drill thicknesses between 50 to 60 mm. Important is the chuck span, it can vary between approximately ten and 16 millimeters. A large chuck span enables the use of correspondingly large drills. The workbench used is often 20 x 20 cm in size, but sometimes a little more space is needed.

Bench drill accessories

The accessories can be extensive. The chuck is mandatory, otherwise the bench drill do not work, but not every machine is equipped with a keyless chuck. It is often available as an accessory, but quite expensive. Another recommended accessory for the bench drill is the machine vice for clamping the parts.

[relatedYouTubeVideos relation=”keywords” terms=”bench drill” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API