A anchor line is a boat and boat equipment that serves to advance anchorto go or to catch up with the anchor again if necessary. Because no matter whether one intends to take a short break on the tour, or whether you want to fix the pleasure boat safely in a harbor, without anchor and anchor line The ship would simply drift away from it due to the waves. If you are traveling by boat, you will need the right anchor anchor line , This must be made of a stable material and be processed reliably, so that you can create his boat safely. In addition, the handling plays in choosing the right one anchor line an important role. Another purchase criterion for the anchor line is the breaking load that has to match the boat.

Production methods of anchor lines

The anchor line is probably one of the least used lines on board a ship. Nonetheless, when using an anchor line, one must be able to rely 100% on the material and quality of the line. Therefore, one should fall back on handcrafted clean products when buying an anchor line. Polyester anchor lines are considered the most uncomplicated and reliable lines for mooring the boat. Because polyester is a synthetic fiber that is waterproof and keeps its shape even when waterlogged when the anchor line is in the anchor box. It is advantageous if the anchor line made of polyester has a light color, so that the course of the rope remains well visible even in the water. In addition to the twisted anchor lines, there are also models, which consists of a Kernmantelmaterial. It is a braiding technique that provides a pleasant handling and makes the anchor line very flexible. In essence, anchor lines are well protected in this type of production from the static forces. In addition, core sheath anchor lines have a high breaking load with a small diameter. Anchor lines are not only sold individually, but also as a complete solution. In such combined models, different seals are attached to the rope. For example, it is possible to buy an anchor line with thimbles, which are spliced ​​at the ends by the manufacturer. These stainless thimbles ensure that the forces are ideally introduced into the fitting on the boat or in the chain forerunner.

What to look for when buying anchor lines

An anchor line should not harden in use, but always stay soft. Also advantageous are those lines that have a good elongation property. Anchor lines with spliced ​​stainless steel collars reduce the anchor chain advance as they partially replace the anchor chain. When buying an anchor line you should also pay attention to the length, which should be a few too long rather than too short. Because when anchoring the length of the anchor line must be at least five times the water depth. The higher the swell and the stronger the wind, the longer the line has to be put in order to avoid lifting the anchor shaft from the ground. The strength of the anchor line also plays an important role as a purchase criterion. Basically, the anchor line should be two millimeters thicker than the recommended line thickness. Ideally, with a chain advance of four to ten meters, an anchor line with a thickness of six to eight millimeters is chosen. The material for the anchor line is recommended polyester products (PES), as this material provides a good passage. In addition, polyester absorbs little water and dries extremely quickly after use. Also advantageous are anchor lines with spliced ​​Kausche, since you spared the node and thereby increases the breaking load of the line. Anchor lines can be twisted or braided, with simple twisted lines being among the cheaper models.