The own poolin the garden provides on hot days for a welcome cooling off and is for more and more people, a piece of luxury that you like to treat yourself. The quality of the water is an important point, so that the bathing pleasure is really a pleasure and is not clouded by dirt in the water and unpleasant odors. With larger pools, it is almost impossible and a costly matter to replace the water every few days with new, fresh. Therefore belongs to each pool Swimming Pool filter also.

Why is one Swimming Pool filter important?

If a pool is used intensively, the contamination of the water by dander, hair, dead insects, dust and dirt increases quickly. The organic materials decompose in warm summer temperatures and begin to rot. As a result, the water quality deteriorates within a short time and is usually no longer suitable for bathing after a few days. By using chlorine, the quality of the water can be kept at an acceptable level for a certain period of time. However, chlorine can only be used to a limited extent. Better for the lasting maintenance of the water quality is therefore a suitable filter system.

Cartridge or sand filter – which Swimming Pool filter are suitable?

The answer to the question of which filter system is better suited for one’s own pool depends first and foremost on the volume of the pool. Cartridge filters are a space-saving and relatively inexpensive solution for smaller pools. Cartridge filters use a filter cartridge made of textile material, which is relatively inexpensive as a spare part. These filters are usually simply hooked into the pool and have a built-in pump.

The suspended cartridge filter from Steinbach is designed for upright pools with a water volume of up to 8,000 liters. The filter can filter up to 1,700 liters of water per hour and is powered by a transformer. The power consumption of the filter is only 20 watts.

For pools with a large volume of water the simple cartridge filters are usually not enough. For large pools therefore filter systems are used with Sandliter. Sand filters are available with one or two filter layers of special quartz sand. The filtration system itself is costly to buy, but they have a powerful pump and can filter a large volume of water several times a day completely. The filter sand can be easily replaced and is relatively inexpensive. Sand filters with pump are always operated outside the pool and supplied with 240 volts. Important for a sand filter is the so-called backwash function. If the filter system is switched to the backwash, the flow direction of the water reverses. The dirt particles in the sand are thereby dissolved and flushed out of the filter housing via a waste water opening. As a result, the service life of the filter sand is significantly extended and improves the filter effect.

Deuba offers with the model MZPP 14 a compact Sand filterwith a filter volume of up to 10,200 liters per hour. The filter performance is large despite the compact size of the pool filter itself garden poolssufficient. The filter is equipped with a 4-way valve and a 400 watt pump.

Swimming Pool filter with heating

Maximum comfort promise Swimming Pool filter that can heat up the water in the pool. A so-called heating-sand filter plant is a normal sand filter plant, which in addition with a heat exchangersequipped. The heat exchanger can be coupled to the heating system in the house, with the solar thermal system or special solar heat exchangers. Heating filter systems ensure well-tempered pool water until autumn.

A good Swimming Pool filter is a worthwhile and from a certain pool size an indispensable investment. The type of filter depends essentially on the volume of the pool. The pool filter should be rather oversized rather than too small. It is important to check the filter cartridges or the filter sand regularly and to replace them in good time to ensure the function of the filter and prevent germs.