Who can call his garden his own, should have one too Spud consider. Weeds are an ugly way of destroying the image many people have of the well-kept one raceto have. The unwanted plants disturb not only visually, but the other plants are also taken nutrients and air, which they are not sufficiently supplied. In order for the flowerbed and the lawn to return to their perfect condition, hard work is usually required. The garden owners try on their knees that unwanted plants such as dandelions are removed. Those who are not successful here usually use strong remedies, some of which also harm other plants. If you want to kill the weeds, you do not need chemistry. With the help of a right one Spud disturbing plants can be removed for a long time, comfortably and quickly. To make this possible, only a few points need to be considered. Everyone wants a device that suits their personal requirements. It can thus be ensured that a Spud will fulfill its purpose in a few years.

What must be considered for the purchase?

Who wants to buy a engraver for weeds, should think about the extent and how often the device is used. The good old handwork can be more rewarding in the very small areas. The soil should be watered here or the heavy rain is awaited. Following is the earthpleasantly and quickly the weeds can be removed with the roots. If you work a little more often, you usually need a simply equipped device. There is only one handle with the sharp tip. The weeds can be easily removed and the users sit on their knees. For long roots and hard ground these are Spud but less suitable. If weeds are to be removed and in a back-friendly, effective and convenient way, then there are the devices with telescopic pole. The plants are then loosened by gripping arms of the depth and therefore only slight movements are necessary on the handle. Hard soil and long roots are also no problem. In the soil, however, often larger holes are formed, which then have to be refilled by hand. The release of the weeds is done with little force and standing. If you use the devices in the large areas, you should make sure that there is an eject mechanism. For weed killing and not to their ejection, the users then have to bend over. Will the Spud bought, then counts first of all the high-quality processing of the devices. The good equipment offers buyers a low weight and without fatigue, then longer work is possible. The handle should be comfortable in the hand and there should be no uncomfortable pressure points. The good device usually offers long gripping arms made of steel, which can then drill deep into the ground. In the ideal case, the telescopic pole can even be adjusted individually so that working comfortably while standing is possible for any height. Of course, the most important factor is the optimal price-performance ratio. For the purchase, however, the price should not be the decisive reason. In particular, the beginners have some difficulties that the engraver with stalk completely straight into the ground is stung. It starts with the hand-weed stingers, because they are easier to pierce for the layman. This is very important especially for stubborn roots such as the dandelion plant.

Discover the right engraver for weeds

It can not be said, which is the right weed cutter. Finally, this is always dependent on different factors. For occasional use and for the small areas is not necessarily a device needed. The weed is often fought by hand by plucking it out. The hand-held weeder can fight the more stubborn plants and the larger areas. Here, the use is a bit power consuming, a little uncomfortable and a bit of tact is needed. The stalk weeder is suitable for anyone who wants a little more relaxed. Compared to the handheld devices, larger holes are left behind and the devices are more expensive to buy. The holes, however, provide the best possible ventilation for a floor and also remove the roots that sit lower. Some weed-cutters are simply a long stem with stippled knives. For this we need some practice in weeding. If the mechanics of the weed cutter exist, it will work like a corkscrew, Around the roots, the blades pierce the ground and the plant is then levered out of the ground with the tap root. Depending on the device, the holes in the lawn will be left behind. If you are looking for the right weed cutter, then the soil condition is very important. Some weeders prefer the sandy soils, and other devices like loamy soils. The engraver can convince especially in the wet, dry, loamy and sandy lawn soils, there are problems only on stony soils.

The different types

Weeds are often referred to as plants such as Knotweed, Dandelion or Thistle. With the help of the engraver, these plants and their roots can be removed from the garden’s useful area. There are different devices on the market, which are very different in terms of structure. In the hand knives there is the angular or semicircular curved sheet, which ends in the slightly V-shaped tip. However, there are also often the stable, thin round metal shaft with the geißfußartigen tip. Most of the time the handle is kept short. Simple models often have a wooden handle here. In the better models, there is the handle made of plastic, which is ergonomically shaped and often there is also soft grip. These devices are inexpensive and usually quick to hand. The devices help when it is little weed. The disadvantage is that you have to bend over at work and in the long run it is a tedious and stressful job position. Better suited then is the weed cutter, which has a style. With the telescopic rod, the engravers can then usually be brought to the large working length and the devices can be operated while standing. Some of the models have the ejection device. After the weed has been removed, it is usually ejected at the push of a button. Without then the hands become dirty, it ends up with it in the sump. If you want to avoid gaping gaps, you can access the models with rotary motion. The tap roots can thus easily be transported out. Compared to the joggers this can lead to a smaller hole. The double-serrated and hollow-shaped blade is thus turned only during piercing. The models with the three slender blades have the same technique. The treadmill can be easily operated, because it requires little effort. Some engravers have the T-handle and it is important that the grip surface is not too short and the device can be operated with both hands. The devices with the D-handle are designed for one hand only.