Gardeners know: the one Scissors for the garden there is not any. A lot of cutting work is necessary in a garden, and different scissors are needed for the different plants. Not only shape and size, but also the construction differ. In some areas, electric pruning shears are on the rise. Here we give you an overview of the different types of pruning shears and inform which shears are necessary for which plant.

Scissors for the garden: differences in construction

Basically, there are two different designs for secateurs. A bypass scissors have two curved, sharp blades that precede each other in the cut (in English: to pass by). It is best used in fresh green because it does not crush the points to be cut. So a precise, clean cut is possible. The Anvil Prunerhas only a straight cut surface, which presses the wood on the blunt side. It is more suitable for hard, dry wood because it squeezes the wood when cutting.

Usually the secateursoperated with one hand. Exceptions are the hedge, branch and pruning shearsthat need greater leverage. If a pair of scissors has a narrow cutting head, it is intended for cutting flowers, young shoots and fresh branches. Specially shaped scissors are also available for pruning rose bushes and fruit trees. Cordless grass shears are available with a long handle, so that no pruning is necessary when pruning the lawn edges.

The universal pruning shears

It is also popular as a flower or shrub shearand is a wise purchase for gardeners who have to deal only occasional cutting work. The pair of scissors is an all-rounder – that is, they can do everything, but none of them very well. To cut shrubs, perennials, flowers or thin twigs, this pair of scissors is sufficient. Those who only work in the garden every now and then will be satisfied with the performance and will not need any further special scissors.

The rose scissors

When cutting rose bushes, it is very important to have a clean cut. Special rose scissors are optimized for this task. So that they do not hurt the tender shoots of the roses, rose scissors are always bypass scissors. Incidentally, they are also called pruning shears, because they are also used in the pruning of vines. Rose scissors are often used and are therefore dull quickly. Be sure to replace the scissors in good time: using blunt scissors can quickly damage roses.

The grass shear

Grass or lawn edged scissors have a narrow, very long blade, with which the raceand just have its margins cropped. It is specially designed for this task: The blade sits down while the handle is held from above. Electric grass shears are a worthwhile purchase for larger lawns, because the work goes much faster with them from the hand. Be sure to remove the cut grass after cutting so it does not start to rot.

The branch or secateurs

Shrubs, trees and especially fruit trees must be pruned regularly. If the branches are not too thick, is one Loppercompletely sufficient for this task. The pruning shears are used for thick branches. Here it depends on the quality of the scissors: If this is not correct, the branches are squeezed off and the tree is damaged. For greater leverage long scissor arms provide. Their disadvantage is the large opening angle, which is quickly bulky especially with little room for maneuver.

Scissors for the garden: Quality is important

In general, when purchasing scissors for the garden, care should be taken that the quality of the material and workmanship is high. The scissors should be good in the hand, have a power-saving translation and have a sharp blade.