As the name already suggests, the mower unlike other lawnmowers a beam. This is attached to the mower on the front. In this device, the beam often has a width of 87 centimeters, so that the tall grass can be cut, as this is very persistent and wild. Because of this, they invented the mower that greatly facilitate the work of gardeners, nature lovers and farmers. Because otherwise everything would have to be cut by hand, which is very time-consuming for large grass areas and no one would do. Of course, the mower Do not replace the gas mower and electric mowers that are found in almost all households. Of the mower is by no means designed for simple grass areas, but only suitable for its areas of application. Very advantageous in this mower is that it can also be used as a snow plow in the winter months as well. Of the mower has a gasoline engine, which is particularly powerful. Of course this must be with gasoline and Engine oilbe filled accordingly.

Layout and function
Beam mowers are often referred to as front mower or single axle. The knife of this mower cuts the racesimilar to ordinary scissors. This unique technology allows the user to cut meadows up to 1.5 meters high with a bar mower. That’s why this mower is less suitable for cutting private gardens. You can mow hay with a bar mower. The cutter bar, which is fastened at the front, contains many cutting fingers, which are about five centimeters long and about two to three centimeters wide. These cutting fingers are distributed throughout the mowing width of the front mower. The two triangular knives are arranged in two rows one above the other. In the opposite direction they rotate back and forth. So the grass is cut according to the principle, according to which also hair trimmers cut the hair. The hand-operated single-axle vehicle is powered by an internal combustion engine, which also takes over the drive of the Mähräder. In this aspect there is no difference to a classical one mowing machine, In the large beam mowers that have been developed for grazing to attach to tractors, the cutter bar is driven mainly hydraulically. The handling of a manual bar mower is almost identical to that of a lawn mower for home gardens. So that the one-axles can be pushed comfortably in the preferred direction, it was equipped with two handles. They are attached to the mower on the scaffolding, which also carry the engine of the front mower.

What to look for when buying a beam mower
Bar mowers have an average weight of about 54 kilograms. The easier the single axle, the easier and agile it can be handled. In addition, the quality and size of the lawn to be cut with the front mower must always be taken into account when making the selection. Some variants were designed to mow at most 1,000 square meters of grazing land. Other models cut down meadows no larger than 3,000 square meters. Another crucial point is engine performance. This is an average of 2.5 kilowatts. In order to use the mower as well as mowing on slopes, this value should not be undercut. A comfortable and easy handling is also important. Very high-quality front mowers include, for example, height-adjustable handles, which make it possible for the user to cut lawn areas in a back-friendly position accordingly. Furthermore, it is important to understand the service and warranty provided by the manufacturer. If you are by no means willing to spend money on the purchase of a special grinder for the single-axle, then it is important to complete a maintenance contract with the corresponding manufacturer when purchasing a front mower. The additional costs pay off with the fact that the one-axles always work properly, which greatly increases the life of the joist.