10 Best Curtain rods wall-mounted of 2019

  • Constructed of brass
  • Includes 5/8" OD x 30" ceiling and 5/8" OD x 10" wall...
  • Pre-drilled for 5/8" OD shower riser pipe
  • ❀ Material: Stainless Steel & ABS
  • ❀ Fan shape folding shower curtain rod, takes up a little...
  • ❀ 304 stainless steel durable no rust
  • Set of 2 curtain-rod brackets mount securely to a ceiling or...
  • Works with rods up to 1-inch in diameter; up to 11-pound...
  • Ideal for creating room dividers or dramatic...
  • The rod was made of stainless steel which will never get...
  • Size: 60 Inch
  • Finish: Chrome
  • Adjustable-length curtain rod in Black extends from 72 to...
  • 1-inch rod diameter capable of handling heavier fabrics; can...
  • Decorative cap finials on either end provide a visually...
  • Set of 2 curtain-rod brackets mount securely to a ceiling or...
  • Works with rods up to 1-inch in diameter; up to 11-pound...
  • Ideal for creating room dividers or dramatic...
  • Constructed of stainless steel ensuring durability and...
  • Stainless Steel Brushed Nickel Finish,to protect against...
  • Fits 1-Inch diameter rod,With a fixed screw
  • Constructed of brass
  • Includes 5/8" OD x 30" ceiling and 5/8" OD x 10" wall...
  • Pre-drilled for 5/8" OD shower riser pipe
  • Versatile rod is great for indoor (bedroom, family room,...
  • Rust resistant coating protects rod from the elements
  • 5/8" diameter curtain rod adjusts 48" to 84" to fit your...
  • CURVED SHOWER ROD: Shower curtain rod curves to provide...
  • DURABLE: Crafted with rust-resistant steel for years of...
  • SIMPLE TO USE: Hardware is included to ensure an easy and...

Cornices Wall-mounted Advisor

Curtains not only set visual accents, they also beautify every room. In addition they protect the premises from prying eyes from the outside. However, before a curtain can be installed, it must first of all the necessary curtain rodto be assembled. However, the assembly itself is quite simple and, with some skill, can usually be done even by beginners.

Good to know

It should first be noted that curtain rods are usually mounted about eight to twelve inches above the window / window reveal. In addition, it may come with the individual types of support to deviations of the respective mounting components. Here, however, the respective carriers are usually equipped with a one-hole or a Dreilochbefestigung at the corresponding curtain rods.

The wall mounting of the curtain rod

Once the curtain rod has been unpacked, first check that the curtain rod has the proper length with respect to the window opening. Depending on the room, a lateral projection of about 20 centimeters is recommended. However, it is also quite feasible to select the lateral supernatant larger. Here it comes, for example, also on the decoration of curtainsat. However, if the pole is a little too long, then it is usually still possible with a conventional iron bar to shorten it to the required size.

Following this is with a pencilthe window center and the center of the curtain rod marked. Now it is only necessary to put the markings on top of each other so that the ends of the pole can also be marked with a pencil.

Thereafter, the attachment points are set for the first of the carrier. Here one should remember that the carriers are generally pushed in a bit by the ends of the rods. The holes can also be easily drawn with a pencil. It is best to install the drilled holes of the remaining beams immediately. It is important to make sure that they are straight or in „balance“.

Now the time has come for a suitable drill to drill all the required holes in the wall and insert one dowel at a time.

So then the base plate with the appropriate, usually enclosed, mounting screws are screwed.

In the next step, the cover rosettes are to slide over the base part in such a way that you only recognize the mounting pin through the opening.

These procedures are repeated until all carriers of the scope of delivery are screwed tight.

Finally, once the rings have been pushed onto the curtain rod, it is possible to attach the rod to their girders. Finally, the end pieces are to be put on the ends of the rods and, if necessary, tightened using a grub screw. The latter, however, depends on the respective model. So it may well be that with the present rod only the end pieces must be plugged.

Do it yourself or professional?

With a little manual skill, it is quite possible to install a curtain rod in „own work“, so you can save the cost of a professional confidently. However, if you are not sure, no one drillowns and does not bring the necessary skill, which should better consult a corresponding craftsman. The skilled person has the desired curtain rod usually installed in no time. In addition, you can usually confidently assume that this holds a very long time and gives pleasure.

*Last update on 2019-08-28 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API