On jack should be part of the basic equipment of each vehicle. In an emergency, these rugged devices help you quickly change a tire yourself. When buying a jack should be placed on a special quality value. A hydraulic jack is very convenient. It is ideal for lifting heavy loads. Most jack have the typical hydraulic technology. Here, the hydraulic fluid is pumped with a lever in the piston. In this way, each car lifts easily and safely. Everywhere can be carried out with its own lift a tire change. This happens without any effort. A big advantage is that the lifter is usually very robust. Thus it can be used for many years. There are big differences between the models. These are to be found above all in the price, in the longevity and in the quality. Also, care must be taken to what weight the lifter is approved. The weight of your own vehicle can be found in the vehicle documents. The approved weight should not be exceeded. Otherwise, it could happen that the lifter breaks down due to the excessive load. Many lifters are approved for a weight of about 2 tons. Some lifters are also designed for loads of up to twenty tons. But these are not vehicle lifts for private use, but rather something for logistics companies.

Advantages and disadvantages of the jack

On jack offers many advantages. Often there are mishaps on rural roads and there is no help in sight. Then it is even better if a lift is in the trunk. A conventional lift does not take up much space and is easy to operate. Thanks to the hydraulic technology, this is possible without any problems on its own. The car is raised so high that the tire can be changed without much force. This saves the call for breakdown service and a lot of waiting time. The biggest difference is the type of hydraulic jack. A commonly used lift is the hydraulic scissors jack. It raises a weight of up to 2 tons and can therefore also be used for heavy SUVs. The lifting height for such a model is 18 to 80 cm. The spindle adjustment is available between 0 and 60 mm. The highest lifting height for such a lift is completely sufficient and should be perfectly suitable for private use. Workshops also have special tools available that have special features. They were developed more for business needs and are of high quality. The spindle thread of a hydraulic jack is a practical addition, whereby the lifting height can be increased again by one piece.

Features of the jack

In terms of load capacity, many models are available for vehicles weighing up to 2 tonnes. But it is much more difficult to get a cheaper model for the heavier vehicles. However, a lifting capacity of 2 tons should not just be considered a weakness. This capacity is finally sufficient for almost all vehicles. On jack who can carry more weight is always much more expensive than the classic standard models. High-quality hydraulic lifters also create higher lifting heights. This is also necessary for some vehicles when changing tires. Only for vehicles such as minibuses, vans or off-road vehicles makes an expensive purchase in any case sense. Especially when the annual change from winter to summer tiresor vice versa on the car driver, then a lot of money can be saved if the change itself is carried out. A workshop is often very expensive and often gets my appointment in the distance. With its own lift, every driver is much more flexible. One of the most commonly used jacks is a trolley jack. As the name suggests, it is intended for maneuvering vehicles. It is often used in professional garages as a professional device, but is also used more and more often by amateur mechanics. Even for the average consumer, such a jack is very useful. These are also devices with a hydraulic technology. This technique has been proven for many years and even beginners will not have any big problems with it. The sturdy lever jack will be similar to a air pumpto inflate air mattresses simply moved from top to bottom. As a result, the device unfolds gradually and the vehicle is pushed upwards. High-quality devices can be detected in the final position, so that nothing can slip.

Different vehicle lifts

In addition to the Rangierwagenhebern and scissor jack are very practical. These models have a diamond shape. They lie on the floor with a corner. Since this lift visually very similar to a pair of scissors, he was called by many manufacturers as a scissor jack. This type of lifter is used in most cases only in the private sector. As before, a small physical effort is necessary with this device. The vehicle is lifted by cranking the device piece by piece. The biggest advantage of this device is the low lifting height and the relatively cheap price. Due to the low lifting height, an even lowered vehicle can be raised. Another alternative is a balloon jack. He is often referred to as a hover car. He is probably the most interesting way to lift a car. It is actually a kind of balloon. With the outflowing exhaust gases, which are caught from the exhaust, the device can be easily pumped out. It inflates until the vehicle has been lifted. The biggest advantage of this device is that the car can be lifted on a sandy and soft surface. No matter where you lie with a flat tire, the jack can be used anywhere. Also in the rally area, the jack is used. Many private individuals have now purchased such a lift, which hardly requires their own strength. Stick lifters are also part of the hydraulic jack. This is a stable car lifter, which has a cylinder shape. From the middle of a kind of piston protrudes. This is moved hydraulically and lifts any vehicle effortlessly. The floor lifter has a light weight and is therefore very flexible and practical. He does not use much storage space in the vehicle. This hydraulic lifter is available at a low price. Another alternative is a pneumatic lifter. It works electrically and is used by many garages and logistics companies. He gets to one compressorconnected. This creates a high air pressure and the lift is able to lift even a vehicle weighing 20 tons.