10 Best Wood Drill of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Wood drill guide

Drilling is one of the oldest craft techniques and was used as early as the Neolithic period to pierce and connect wooden objects, skins or antlers, for example. Since that time, there are different types of drills that can be used for a variety of purposes. So will be different depending on their field of application drillused. Among the best known types include metal, wood and concrete drills, because every building material requires a corresponding drill. The techniques are called hammer drilling, rotary drilling and hammer drilling. Since each material has different properties, they require a drill that can take into account and process these properties.

Of the Wood Drill general

On Wood Drill consists of either tool steel, carbon steel or chrome vanadium steel. It can be used to process soft or hardwood, plywood, chipboard, MDF boards or other wooden parts. The cutting of the Wood Drill are longer at the outside edge than at the inside near the center of the drill. This has the advantage that during drilling the edge of the borehole is first cut, the wood fibers are severed and a clean hole without any tears is created. Wood Drill They also have a centering tip, which also serves for precise alignment. A pruning is not necessary here, because the drill can not run after the preparation. There is a spiral on the shaft of the wood drill, which conveys the wood dust from the drill hole during drilling. On Wood Drill can be in a commercial drilling machineor a stand drill. If very deep holes are to be drilled in wood, it is suitable for this purpose auger, This drill has a long, wide drill spiral and does not have a normal centering tip. Instead, there is a thread here, which provides an independent feed during drilling.

When is the wood drill used?

As the name implies, wood drills are used for drilling wood. When boring wood, the outer edge of the borehole is drilled first, making the wood drill a smooth borehole. Wood drills are divided into Forstner drills, cylinder head drills and nail and auger drills. A Forstner drill is used for a smooth bore with a relatively large hole. A cylinder head drill is used for hard woods. Nail drills are used for pre-drilling or small holes, and auger bits are suitable for deep holes. When drilling wood, it depends less on the power, here is the right technology and the right one Toolasked. So that a borehole really goes right angle into the wood, drilling is with one drillrecommended. In order to avoid tears in through holes, a flat piece of debris should be drilled on the bottom of the workpiece. A special wood drill is a twist drillHaving a centering tip, the precise placement of the drill is facilitated. Projecting vertical side cutterwork the edge of the hole clean. The grain can also be used for the wood. Using a wrong speed when drilling in wood can lead to dirty holes or even burns in the wood. The recommended speed when drilling in wood is between 800 and 2000 rpm with a diameter of between 2 and 22 millimeters. Drilling in wood is considered a classic in the DIY sector and probably accounts for most of the drilling work. If no wood drill is available for urgent work, then a metal drill can also be used as a substitute. Because metal and wood drills are very similar in their shape, the metal drill is the centering tip is not so pronounced and the cutting edges have a different angle.

[relatedYouTubeVideos relation=”keywords” terms=”Wood Drill” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API