10 Best tool belt of 2019

  • COOLING MESH - 5-inch moisture wicking, mesh backed waist...
  • DURABLE CANVAS - Fabricated of heavy-duty and rip-resistant...
  • LEFT-SIDE STORAGE - Left pouch has 3 wide opening pockets, 3...
  • Fits waist sizes up to 48-Inches (1219 mm)
  • Accommodates tunnel loop and slotted tool pouches and...
  • 2-Inch (51 mm) wide polypropylene webbing
  • 【Had Troubled By Messy Nuts, Screws?】 Don't worry! Our...
  • 【Lightweight and Great Time Saving】Our magnetic...
  • 【Perfect Gift For My Father's Electronic Repair And...
  • Reinforced pouch bottoms
  • Infinity belt fits up to a 52" waist
  • Barrel-bottom, super capacity pouches
  • HEAVY DUTY WORK APRON: This Custom Leathercraft work apron...
  • 12 POCKET WORK APRON: This CLC tool apron features 4 main...
  • POLY WEB BELT: This work apron comes with a 2-Inch Poly web...
  • HEAVY-DUTY - Heavy-duty 2-inch webbed work belt fits most...
  • CUSTOMIZABLE - Add pouches or single tool holders to create...
  • DURABLE BUCKLE - Secures with a durable, high-impact plastic...
  • Embedded with super strong magnets for holding screws,...
  • Provides a third helping hand when you need it most
  • Ideal for many woodworking, home improvement, and do-it...
  • X Style - Designed to distribute weight of duty belt over...
  • Durable Material - Made from strong nylon webbing. Offers...
  • Adjustable Length - Adjustable front and back straps helps...
  • 15 STRONG MAGNETS: Embedded with " 15 " super strong...
  • Lightweight and Convenient: Ideal for many woodworking, home...
  • Comfortable and Long-lasting: Made of durable 1680D...
  • COOLING MESH - 5-inch moisture wicking, mesh backed waist...
  • DURABLE CANVAS - Fabricated of heavy-duty and rip-resistant...
  • LEFT-SIDE STORAGE - Left pouch has 3 wide opening pockets, 3...

Tool Belt Guide

Many hobby and professional craftsmen know the following problem: While one on one ladderFor example, to connect the new lamp or hang up the wall shelves, it suddenly comes to mind that you have the screwdriverforgot. So you get off the ladder, go to toolbox, digging out the screwdriver and after climbing back onto the ladder to complete his work, you realize that you also need pliers. At least now, most craftsmen want, if possible, your entire Toolto have a man. With a tool belt can be realized just that wonderful.
On the market, however, there are a variety of different tool belt , which sometimes differ greatly in function and processing. To the right one tool belt Therefore, some points should be noted.

The artisan type
First, you should determine which craftsman type you are. In principle, a distinction can be made here between the occasional craftsman, the ambitious handyman and the professional craftsman. Depending on which kind you belong, also the requirements for the tool belt , If, for example, you are only doing manual work in exceptional circumstances and only have the tools you need, your requirements will be very different from those of a craftsman who does manual work several times a week and has a variety of different tools. In addition, a must tool belt Depending on the profession, different tools are used by professional craftsmen, so that a distinction must also be made between professional craftsmen.

the tool circumference
If you are rarely a craftsman and you have little tools, you should look for a simple and cheap tool belt. In addition to about 7 tool loops or pockets for the basic tool but this should also have at least one compartment for small things such as screws or dowels.
If, on the other hand, you have a large stock of tools and you are often involved in manual work, you should make sure that the tool belt has enough tool loops or pockets for you. You should consider which tool you always, often or rarely use. Sufficient compartments for screws, dowels, nails, etc. must of course also be present.
Professional craftsmen work often and partially with rather rare tools and should therefore pay attention to the size of the tool holder as well as its size. In addition, a tool belt is recommended here, which can be used as required, e.g. can be extended with an additional bag.

Material and workmanship
Tool belts are available in various processing variants. Most commonly, however, you will encounter tool belts made of leather, nylon or polyester. Leather is the heaviest, but also the most robust material. Ultimately, however, each of these materials is suitable, so that can be decided on the personal taste. A very important criterion is the processing. If the quality of the tool belt is insufficient, the tool belt will sooner or later fall apart, even on rare occasions. The more often the beltis used and the more tools he has to wear, the better he should be processed. For example, if the seams are double processed, this is often a good sign of sufficient resilience. Simple seams or rivets, on the other hand, have not been successful in practice. Likewise, pay attention to the processing of the belt buckle, as this is a particularly vulnerable but also an important part of the tool belt. Small and thin snap-on plastic closures should be avoided.

The wearing comfort
Wearing comfort is also an important criterion for or against a particular tool belt. The more often and longer you have the tool belt in use, the more comfortable it should be. Especially professional craftsmen who use the belt daily for several hours, should attach particular importance to this property. Back-padded tool belts are often more comfortable than without padding.

*Last update on 2019-08-13 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API