10 Best tile drill bit of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Tile drill guide

One of the biggest challenges for a home improvement worker is drilling in tiles. Tiles can splinter or even shatter. For this reason, drilling in tiles in rental apartments is not welcome, and must be discussed with the landlord. So if there is no other way, and you can not find a suitable adhesive solution, only the grip remains drill, But how do you drill best and with what? What else has to be considered?

The preparations are important

The most important thing to remember before drilling is to use a gauge to check if there are power or water pipes where you want to drill the hole. If this is not the case, use a water-soluble pen to mark the point where you want to drill, then lightly brush the glaze of the tile. This is important in order to be with the tile drill bit does not slip off. Then you stick with it duct tapea cross to the place where you want to drill. This avoids jumping the tile. Then you go over to the most important, the right one tile drill bit ,

Which tile drill bit one needs?

There’s a simple rule that works for everyone tile drill bit applies, provided that it is not a water-cooled diamond drill. Always have a bowl of cold water ready for you to drink tile drill bit always cool and he does not burn. To find the right drill you need to know the scratch hardness of the tile. This is decisive for how strongly the ceramic glaze resists a tile. A distinction is made between levels 1 to 10, with grade 8 porcelain stoneware being one of the hardest coverings. Normal tiles and glass drills are able to handle scratch-resistant tiles. But most suitable are water-cooled diamond tile drills. On the other hand, porcelain stoneware and natural stone tiles require completely through hardened tile drills. When using normal glass or tile drills, you should make sure that you only pierced the tiles, as they quickly dull in the masonry.

Which tile drills are there

For tile drills, there are three types of drills. First of all there is the normal tile drill. This is very similar to the concrete drill, as it has soldered at the top of a cutting edge made of carbide. The diameter of the cutting edge is identical to that of the shank. The two grooves, which are incorporated helically on the side, ensure that the chips are transported out of the borehole. Coating the tip with titanium nitride increases the hardness of the drill.
A better control, especially when drilling, is obtained with a tile drill, which is strongly attached to the glass drills. The acute angle of the drill head ensures that this drill drills punctually, and not like a normal tile drill with the entire diameter. The tile drill scrapes out an ever-expanding hole. The drill made of HSS is smaller in diameter than the drills made of carbide and also have no helical groove.
The best results are achieved with a galvanic tile drill with diamonds. It is a hollow drill, which is peppered with diamonds in its drill bit. No matter which drill you use, you should always have a bowl of water ready to cool the drills so they will not burn. There is also an additional template for the diamond drills with suction cups for mounting on the tile. By a water pressure vessel, the drill is cooled.

Conclusion

Who wants to drill a hole in a tile, should already know how hard the tile is to choose the right drill. Also, following various tricks, such as with the Ankörnen or the Klebebandkreutz, help that the tile does not break. Furthermore, it is important to consider exactly how often you need the tile drill. In that case, it may be worth buying a high-quality diamond tile drill bit, rather than buying the cheaper alternative over and over again. But no matter what drill it is, a certain caution must be given in any case. So it is important at the drilling machineswitch off the hammer and hammer function. This is important so that the tile is not exposed to unnecessary vibrations transmitted through the tile drill. Otherwise, it is easy to dare to drill into the tiles.

[relatedYouTubeVideos relation=”keywords” terms=”tile drill bit” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API