When extreme precision is required for sawing, a classic one is enough sawnot from. Here comes one Tauchsäge optimal for use.

Difference between classic saw and one Tauchsäge

In a classic saw, the saw blade and the motor are firmly connected to the guide plate during sawing. In contrast, the saw blade and the motor are tiltable and lowerable, providing more flexibility in sawing. These dive at the Tauchsäge almost into the wood. Thanks to the possibility of swiveling, you do not have to saw at a corner of the material when sawing, but you can start sawing yourself in the middle.

Features of a Tauchsäge

To be with the Tauchsäge To work unhindered, the motor of the submersible saw must have sufficient strength. If the engine has a power of 1200 watts, which is ideally the case, a maximum speed of at least 5000 revolutions per minute is guaranteed.
The depth of cut is another important feature of the diving saw. While in most cases a cutting depth of 500mm is sufficient, it may be the case that certain materials require a greater depth of cut. Therefore, it is important to check how strong the material to be cut is before purchasing the submersible saw.
The diving saw has the ingenious function of the pivoting. Because this allows even Miter cuts. Mostly there is a maximum swivel range of 48 °.
Other features of the diving saw include the extraction nozzle and the guide rail. The extraction nozzles are used to attach small collection bags or one industrial vacuum cleaners, In this way, the accumulation of wood dust and chips is avoided, so that cleaning up after work becomes unnecessary. In addition, the work clothes always stay clean while working.
The guide rail ensures that the cuts made are clean and precise. This avoids splintering or tearing of the workpiece edge. The surface is also not scratched at work.

Advantages of a diving saw

With a dip saw, cuts of up to 1/10 mm can be realized exactly. However, the submersible saw should always be used in combination with the guide rail and the appropriate saw blade. In addition, miter cuts are also possible. Sawing can be started in the middle of the material. As a result, the use of drillor the jigsawsimply superfluous.
Otherwise, the hobby handyman rarely hits his performance limits with a diving saw. The submersible saw is much more flexible in use than the other saw types and can be used even in small spaces without any problems, since there is no need for additional space for the input and output. Thanks to its comparatively low weight, the submersible saw can be easily transported anywhere.
In terms of safety, the overload protection protects against overheating due to continuous operation. In the event of a defect, the submersible saw also switches off automatically.

The correct handling of the diving saw

Proper handling of the dip saw requires suitable protective clothing. glovesduring sawing are strictly prohibited, as they may get caught in the machine and cause injury. In addition, it would be good to provide a blue helmet.
Before immersing the saw blade in the material, make sure that the saw blade is already rotating. The diving saw must be held securely and stand firmly on the ground. Then gently squeeze the saw in the desired direction, being careful not to do it too fast.
The cuts of the diving saw can easily be compared with the cuts of a professional format saw. These are done quickly and easily, so that the work is done quickly with a diving saw.

The right care and cleaning

Proper care and cleaning ensure a long service life with the submersible saw. For this purpose, the dipping saw is freed after each use of coarse dirt particles with a cloth or duster. Water should not be used in large quantities as it could get into the mechanics. However, if a dry cloth is not sufficient for cleaning, you should get a special industrial cleaner in the specialist shop.
From time to time, it may be advisable to bring the submersible saw to a dealer of your choice. In this way, it is regularly checked if everything is working correctly. In addition, all damaged parts are replaced. Otherwise, the diving saw should be kept dry.