10 Best straightedge of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Guideline advice

The straightedge is also called straight bar, set bar and Abziehlatte. The tool is used to determine height differences on level surfaces and surfaces, such as floors. A straightedge is different from one spirit levelin that it is not equipped with dragonflies. When using a flat straightedge the alignment of the surface concerned is made by means of the straight surface. Other than the name suggests, there is one straightedge not made of wood. The long, straight slats are produced by the various manufacturers of aluminum, hard plastic or metal in various lengths. To deal with the straightedge To simplify, some manufacturers equip their risers with penetration holes. In addition, slats with horizontal veins and vertical vials can be used.

Substrate test with a guideline

To check the evenness of a surface, additional measuring wedges are required in addition to the leveling plate. The standard should be at least 200 centimeters long, such as the model Alu Richtlatte by DEWEPRO. Before starting the evenness test of a surface, it must be ensured that the surface is absolutely free of cracks, dust, dry and solid. If these conditions are met, the set bar is placed on the surface. Next, measuring wedges are placed underneath hollow areas. The deviation in height can be read off, for example, by means of a yardstick. However, this procedure is not professional. The deviation should always be read off the measuring wedge.

Criteria to consider when choosing a benchmark

Like many other tools and tools, the standard is also manufactured and offered in various designs. What criteria must be taken into account when selecting the new standard? There is no universally applicable standard. The length of the new guideline must always be selected according to the intended use. Other important criteria in the selection of a standard are the material, the measuring accuracy and the processing of the product. At this point, the purchase of a branded product is absolutely recommended. The damage caused by a bent level exceeds the cost of acquisition many times over.

The measuring accuracy of a yardstick is given in mm / m. Particularly high measuring accuracy is provided by the leveling rods with integrated double eccentric locking, for example the Rabob model Steckbarer-Richtscheit „Profi“.

Of course, the price will influence the purchase decision. The prices for guideways vary between 10 and 80 euros. The models at the upper end of the price scale are longer straight bars, which are also usually equipped with dragonflies, such as the product Setzlatte 3 m 2 Libelle Stabila by MM Spezial. Do-it-yourselfers can easily dispense with the equipment with dragonflies and use a spirit level as an alternative. Length adjustable shelves are particularly versatile, such as the product pull-off set from BWG Bauteam. Another embodiment are collapsible adjustable slats.

Especially recommended are aluminum slats, such as the model Alu 2000mm from H & G, which are manufactured and solidly processed. The material aluminum guarantees optimum stability, longevity and maximum strength.

In addition, when buying a straightedge that must be frequently transported from construction site to construction site, it is important to pay as much attention as possible to the lowest possible weight of the leveling board.

Advantages of slats

A standard is as an aid in construction, plastering and masonry work. The use of the tool makes it possible to realize absolutely flat surfaces and to increase the quality of the work with little effort. During concreting, the useful tool is used as a stripping mat to remove the newly concreted surface. Trapezoidal slats, on the other hand, are used to align gypsum plaster. Furthermore, a leveling bar is suitable as a guide rail on a circular saw and as a landing page for a spirit level.

[relatedYouTubeVideos relation=”keywords” terms=”straightedge” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API