10 Best shears of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Tin snips guide

Sheet metal shears are power tools that are suitable for separating solid materials, such as steel or aluminum sheet. They are used, inter alia, in electrical installation, in vehicle construction or drywall. It is advantageous in these devices that the plates and sheets can be separated with little effort and within a short time. For this one uses different types of tin snips.

With the right one shears Cut metal quickly
By the right one shears In addition to non-ferrous metals, the stainless steel INOX and steel sheets can also be processed. Here, material thicknesses from 0.5 to 1.5 millimeters are common. How high the corresponding cutting performance is certainly also depends on the respective engine power. However, the highest possible speed and material thickness during cutting are also dependent on the machine types. Because these work with completely different ways of working.

shears
The conventional shears has two tool cutting edges, a lower and upper knife. With these, the material is automatically separated, due to the lifting movement of the upper blade. The big advantage of this machine type is the fast cutting speed. However, it is particularly suitable for straight cuts and only for correspondingly larger-scale curved cuts.

slitting shear
The slit scissors is equipped with two lower knives and a movable cutting knife, which lies between them. During cutting, the material is simply rolled upwards to create a slot in the material and a certain material waste. With this type of machine, the maximum cutting performance is often 1.5 millimeters. Often the cutting blade can be easily replaced, so that the device can be matched to the type and thickness of the desired cut. There are special knives for curvy or straight cuts.

nibbler
The nibbler or rodent works in the true sense less like a corresponding pair of scissors, but more like a punch. This is equipped with a movable punch and a solid die. The cut takes place due to a punching movement with the corresponding punch, whereby the punched material can be round or square. Because this type of tool nibbles or gnaws through the material, it is commonly called a nibbler, nibbler or rodent. The term nibbler is derived from English to nibble, which translates as nibble means.

Different types of drive
In principle, you can choose between metal shears between devices that can be operated with compressed air, by power cable or with a battery. The corresponding drive has the advantages and disadvantages similar to other power tools.

Electric metal shears
Electric sheet metal shears powered by the power cord often provide high and reliable engine performance. It is advantageous that they only need a socket to operate, which is within reach of the respective work area. However, due to the cable in its movement is limited accordingly. There is also a risk that the power cable can be damaged by the sharp edges, so you have to be very careful at work.

Cordless Shears
The cordless shears do not require any cables. Thus, one has a good handling and a high degree of freedom of movement. Due to the powerful batteries, the wireless machines are also suitable for material thicknesses of up to 1.5 millimeters. However, the working time is limited due to the limited capacity of the battery accordingly. If the battery has no energy left, it must first be reloaded before it can continue working.

Pneumatic Shears
To use compressed air snips you need one compressorcorrespondingly providing the compressed air from which such a device is driven. The work progress and the cutting performance is therefore not only dependent on the device itself, but also on the size and the working pressure of the air tank of the compressor used.

Manufacturer of sheet metal shears
The following brands are very popular among the different types of tin snips:
– Bosch
– Makita
– Trump card
– Fine
– Hazet
– Güde
– Mauk

[relatedYouTubeVideos relation=”keywords” terms=”shears” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API