10 Best Punch of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Pincers guide

Punching pliers are available for various applications up to the special hole pliers for punching sheets in the body shop. The most well-known hole pliers are probably the so-called revolver hole pliers, which are to be found in many households and hobby workshops. With a Revolving punch pliersIt is easy to punch different materials such as leather, paper, plastic or cardboard. The functional principle of a Punch is the same as with other pliers. With two long levers, two jaws are pressed together via a swivel joint. In a revolver punch the upper jaw is a small, round wheel, on the circumference six so-called punches with different diameters are usually arranged. The lower jaw carries a thick, very flat and mostly circular anvil or pressure plate. For punching, the material is held between punch and pressure plate and pressed the pliers. The punch is pressed by the material against the pressure plate and the hole is done.

As with most tools, there are also big differences in the quality of the punching pliers and thus in the price. The most important quality feature of a Punch is the goodness of the workmanship. Only with a precisely processed Punch will you achieve the desired results. This applies in particular to the pivot of the pliers, to the locking of the revolver and the exact alignment of the punch to the pressure plate.

The hinge of the Punch

The joint of a Punch is in the truest sense of the word the linchpin of the pliers. Only if the hinge works without play can the holes be made clean. A backlash-free rotary joint is the basic prerequisite for being able to press the punch exactly perpendicularly to the pressure plate.

The locking of the revolver

On one side of the revolver with the punches is a plate with the same number of notches as the revolver carries punches. A spring-loaded nose snaps into these notches and holds the revolver in position with the selected punch. As a rule, the revolver can only be turned in one direction. For a good quality punching pliers speaks a play-free locking of the revolver. That is, when the nose is engaged, the revolver should be able to move only with a certain amount of force. Inferior pliers, the nose does not fit exactly into the notches or the spring is designed to weak.

The alignment of the punch to the pressure plate

The most important quality feature of a good punch is the exact alignment of the punch to the pressure plate. This means that when the pliers are compressed, the punch must rest on the entire circumference of the pressure plate. If the opening of the punch is not absolutely parallel to the pressure plate and the cutting edge touches the pressure plate only in a small area, then the material is not completely cut through. The hole can then be cut out only by vigorously moving the pliers back and forth. If you have the opportunity, you should definitely check the exact alignment of the punch before buying a punch.

Furthermore, one should consider when buying a pair of pliers how many times you will probably use this. Who occasionally needs a punch to make another hole in one beltfor which a pair of pliers with simple metal handles is generally sufficient. If the pliers should be used regularly in the hobby workshop, then it is advisable to buy a perforated pliers whose handles have an ergonomically shaped plastic coating. The pliers are better in the hand through the plastic handles and the shape prevents frequent blistering on the hands with frequent use. A high-quality turret pliers with a good price / performance ratio is S & R professional turret punch gun. For those who need or want to work with a turret pliers, the Famex 3519 Revolver punch with additional lever support is recommended for a significantly reduced effort.

[relatedYouTubeVideos relation=”keywords” terms=”Punch” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API