10 Best lever clamp of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Lever guide

Screw clamps for a complete wood workshop

Especially when fixing or gluing workpieces are clamps practical tools and nowadays belong to the basic equipment in a workshop. Especially in a wood workshop you can not do without these screw clamps. Thanks to their contact pressure, two construction pieces can be very easily glued and then dried. A clampconsists of a massive rail. There is a right-angled arm at the top of this rail. While this is stably fixed, a second arm on this rail can be moved very easily. So the building pieces can be clamped. Finally, if the flat span is properly aligned, the spindle can be tightened with one hand. So the building piece is clamped and can not slip anymore.

Types of screw clamps

1. One-handed force:
This is ideal for clamping and gluing work that requires special care. The advantage of her is that she can be operated with only one hand.
2. Malleable screw clamp:
This screw clamp is used for a rigid clamping of pieces of wood. The cast iron clamping arm is attached to a rail made of steel.
3. all steel clamp:
The fact that both parts are made of steel in this ferrule, creates an elastic and slightly resilient constitution. This ensures a high clamping force and is ideal for metal workpieces.
4. Carcass clamp:
This screw clamp has two parallel clamping surfaces. This is very advantageous for gluing work.

lever clamp

In contrast to handed clamp, be at the lever clamp two hands needed. The lever provides the necessary pressure build-up by moving the pressure plate. With the help of the latching mechanism, this built-up pressure is maintained while working on the workpiece. Because at one lever clamp the pressure is metered, the workpiece can still be aligned quite well. After that, only the final pressure has to be built up by the lever.
The best known levers are the Bessey brand. These are dimensionally stable, low-torsion, lightweight and above all handy. The lever generates a high clamping force with little effort. This is five times faster than with a conventional screw clamp. The optimized rail profile ensures a uniform build-up of the clamping force and full utilization of the span.

Variants of levers of the Bessey brand:
1. lever clamp GH:
At a full utilization of the span is at the lever clamp GH of Bessey a uniform build up of the clamping force of up to 8500N possible.
Second lever clamp GSH:
These levers are not only dimensionally stable, torsion-resistant and handy, they are also insensitive and safe against vibration. With a lever clamp GSH a clamping force of up to 7500N is possible.
3. Lever GUH:
These are Bessey lever GU25-12-6H. This variant is very well suited for T-profiles and for overall clamping. With this lever clamp, a clamping force of up to 3800N can be generated.
4. Lever GTR-Festool:
This variant includes the all-steel lever clamps GTR16S6H and GTR12H from Bessey. The shape of the fixed clamps of these lever clamps is perfectly matched to the profiles of the Precisio and the MFT, as well as to the groove of the guide rails. This ensures a secure attachment of the guide rails on the workpiece.
5. Lever SGHS:
The two models SG-50HS and SG-25-HS are heavy, safe, very stable and also insensitive to virions. With its compact rail profile, a buildup of clamping force of up to 9500N is achieved.

[relatedYouTubeVideos relation=”keywords” terms=”lever clamp” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API