10 Best drill of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Drill stand guide

DIY at home – a popular and not a simple hobby

DIY is one of the favorite hobbies in Germany. Whether it is milled, sawn or drilled. At the beginning, the basic equipment is sufficient. But the more knowledge the amateur handyman acquires and the greater the experience, the greater the desire for professional equipment. These not only make a sensible addition to the workshop, but also make working a lot easier. For example, drilling operations can be performed e.g. split into two parts. The first area concerns drilling on solid surfaces, such as on ceilings, walls or floors. Here is the drilling machinemovable and the ground firmly fixed and therefore non-slip. The second area concerns drilling work on moving workpieces. These drilling operations are therefore associated with some difficulties. The drill alone usually has to be held with two hands. In addition, however, the moving surface also needs a firm grip. If one keeps these, e.g. stuck with the foot, this can not only end with an accident, and the results obtained are not satisfactory and accurate. An efficient measure for holding the mobile workpieces are the drill ,

What is a drill and how is this structured?

In particular, drilling vertical is a real challenge. This can inevitably result in drilling by hand inaccuracies. Either the borehole is not quite at the desired location, not at right angles or at the end larger than intended. The biggest challenge when drilling by hand is the potential risk of accidents, since the workpiece must be held with one hand and the drill with the other hand. That’s it riskslipping larger and may cause serious injury. At a drill the drill and the workpiece are clamped. This leaves both hands free. The result of the holes is also satisfactory.
Equipped is one drill with a drilling table and a clamping device, the so-called recording. The neck diameter is usually 43 mm and must be designed exactly to the dimensions of the drill. The workpiece should be placed on the drilling table for drilling or secured with a machine vice. In this case, the second method is the safest because the workpiece can not twist and thus injuries are avoided. With the help of a crank, the drill is pressed onto the workpiece and can work through. At the same time, the leverage applied ensures less effort.

types of drill

1. Mobile drill stand:
Points this mobile drill stand with its small size and thus small footprint. Since it can be taken very easily, it can be used almost everywhere. However, they are not suitable for drilling metal.
2. Stand drill stand:
Its shape resembles that of a drill press. He has a solid base and is also suitable for metal work. Not every model has an angular bore.

What should be considered when buying

1st bracket:
As a rule, there are the drill stands with a diameter of 43 mm, in which commercial drills can be clamped.
2nd working height:
The working height, which thickness the material may have. As a rule, these values ​​are between 20 and 30 cm.
3. Base plate:
The larger the base plate, the more surface is available and makes working easier.
4. Weight:
In the case of a standing drill stand, the rule is that the heavier the weight, the more stable the drilling aid. The mobile drill stand should not weigh more than 2 kg.
5. Settings options:
The easiest way is a drilling aid with tool-free quick adjustment. So only one handgrip is necessary for the angle hole. With the help of the depth stop function, it is possible to determine how deep the workpiece is drilled.

[relatedYouTubeVideos relation=”keywords” terms=”drill” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API