10 Best Compressed air gun of 2020

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

[wwp_vc_breadcrumbs_dynamic show_home=”1″ show_parent=”1″ show_child=”1″ theme=”0″]

No products found.

Compressed Air Gun Guide

For cleaning offers a Compressed air gun helpful support.

A common application is the cleaning of holes or threaded holes. Likewise, larger areas can be freed of foreign bodies and made dust-free. The use in combination with detergents works very well. The workpiece can then be blown dry. Simple versions are often carried on commercial vehicles equipped with their own compressed air system.

Which variant of the Compressed air gun for which purpose?

Depending on the Einsatzart certain versions of Compressed air gun particularly suitable. Thus, for example, with a short, curved air gun reach no deep blind holes. When cleaning, a long version is available, which in turn is unsuitable for blowing in narrow areas. Some models are offered with length-adjustable nozzles. As a result, the range of use increases enormously. To meet certain requirements for safety at work, there are devices with a safety nozzle. Here, the air comes out indirectly, which minimizes the risk of injury by a hard jet of air. Particularly important is the type and accuracy of the dosage. Often the air jet can be regulated by the amount of pressure on the operating lever. This does not always work exactly and varies from manufacturer to manufacturer. For a precisely metered air jet, a version with pressure regulator is recommended. Agricultural equipment can be cleaned particularly well with extra long nozzles. The company Hazet offers the article 9040LG-3/2 a total length of 1075mm. Supplied with a Venturi nozzle for high air flow and a nozzle that lets the air flow escape laterally. This makes it possible, for example, to clean gaps between sandwich coolers very well. If you often clean smooth surfaces, offers a blow-out. You can also carry this comfortably in your pocket.

Differences in construction and quality

Due to the large number of suppliers of compressed air guns offers an accurate look at the quality and execution of the desired model. For plastic devices, the connection thread for the compressed air connection should consist of a recessed metal sleeve. This avoids damage to the housing if the nipple is screwed in too tightly. When using sealing tape or sealant is a little more than handfester suit. Since not every model also a nipple is included, pay attention to the scope of delivery when buying. Metal exhaust guns should have a cold-insulated handle. With longer use that is much more pleasant working. In addition, the operating pressure and the maximum pressure should match the conditions of your compressed air system. For a trouble-free operation also the air requirement plays a role. In the technical data, this information should be found in a quality model. Some manufacturers offer for Pneumatic equipmenta spare parts supply with wear components. General care of the equipment is limited to cleaning and, depending on the design, the avoidance of certain chemicals. Be careful not to swap devices from different work environments. In a paint shop, the devices must be absolutely oil-free. For use in the workshop or on the vehicle, it does not hurt to occasionally add a drop of compressed air oil into the port. This supports functional reliability and increases the service life of the seals.

[relatedYouTubeVideos relation=”keywords” terms=”Compressed air gun” max=”1″]

*Last update on 2020-11-04 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API