10 Best wall Hood of 2018

  • High-end LED lights are 3x the brightness of most competing...
  • Touch screen control panel
  • 3 speed settings. Charcoal carbon filters
  • Dimension: 29.5" W x 19.75" L x 42.25" H
  • Minimum Drop Down Height: 30.75"
  • Required Ceiling Height: 8 to 9 ft
  • For use as the outside sidewall termination of Kitchen, Bath...
  • Used with all 3 25-Inch x 10-Inch duct vent products
  • Made of durable galvanized sheet metal
  • High-end LED lights each have 49 individual bulbs; that's 3x...
  • Touch screen control panel is sleek and easy to clean
  • 3 speed settings to suit different needs
  • For use as the outside sidewall termination of Kitchen, Bath...
  • Used with all 3 25-Inch x 10-Inch duct vent products
  • Made of durable galvanized sheet metal
  • Overall sizing is 12-3/4" wide x 5-5/8" high. Duct fitting...
  • Equipped with a spring-loaded backdraft damper and bird...
  • Wall cap is made of 24 gauge CRCQ steel construction with a...
  • Professional hood wall cap matched to your system's needs
  • Has a 10-inch diameter
  • Made of galvanized steel
  • Dimension: 29.5" W x 18.5" L x 42" H
  • Minimum Drop Down Height: 26.75"
  • Noise Level: Less than 65dB at 343 CFM
  • Overall size showing on the surface is 9" square with a...
  • Equipped with a spring-loaded backdraft damper and bird...
  • Wall cap is made of 22 gauge CRCQ steel construction with a...
  • Touch screen control panel & sleek modern design.
  • Capable of ventless operation. No additional kit required!
  • Features 3 speed settings & 2 LED lights.

Wall Hoods Guide

What is meant by a wall hood?

Such a design belongs in the genus of cooker hoods, also called „vapor withdrawal“. The person skilled in the art refers to the vapors produced during cooking or baking. The term „wall hood“ refers only to the location where it is to be attached, namely on the wall. Within this design, you can fall back on a variety of variants. For example, you have the option of earning bonnet hoods that run diagonally upwards so you do not bang your head. Also, you can opt for the classic versions in a fireplace as well wall Hood Buy with a flat housing, which give a straightforward look. Depending on the design of your premises, you will also get these models in different widths, from 40 cm to 200 cm.

The different functions in dealing with the kitchen art

First there is wall Hood that work with exhaust air. Here, the fumes are passed through a grease filter and out of the house by means of generous pipes with diameters of 125 mm or 150 mm. Compliance with these dimensions is important so that neither the volume of the hood increases nor reduces the exhaust air performance.

Second, the market also provides models that operate with circulating air. The vapors are passed through activated carbon and fat filters and returned to the kitchen. Experts recommend such a mode, for example, for passive and low-energy houses. If you decide for such a construction, then please pay attention to the regular filter replacement, as otherwise accumulation of grease in the hood can occur and the activated carbon no longer filters the odors.

Which advantages and disadvantages does the respective construction offer?

Wall hoods with exhaust filters are generally more efficient as they perform better and, in addition, operate quieter, unlike recirculating air filters. A disadvantage is the complex installation, which of course also suggests higher costs to book. For example, you have to make a breakthrough to the outside. On the other hand, with a wall hood that works with circulating air, you do not need a breakthrough. However, the humidity caused by the fumes remains in the room, so you need to ventilate more often, which can lead to heat loss. The filters mentioned above make the suction louder and more effective.

What should you look for when buying a wall hood?

Before making a purchase, it is advisable that you consider how high the performance of the hood must be to remove the haze. In order to reach a result, it is advisable to multiply the length, width and height of the kitchen. Six times this value is the result that gives the minimum output of the wall hood. In this context, it is more convenient to choose a model with an adjustable blower. You will find a wide selection, for example, from the manufacturers Bosch and Siemens. Of course, the wall hood should also fit in shape and color to your kitchen. In addition to optical aspects, the size ratio is also decisive. In addition, you should pay attention to the lighting, where you can choose between the classic halogen lighting and innovative LED systems.

Some tips to support your purchase decision

A visually harmonious image, for example, the model „Neff DST 9948“, a hood that captivates by a slight rounding of the bottom. Thanks to their electronic control, you can finely dose the air output, while the 90 cm wide product works very quietly.

An inexpensive alternative is the brand named „Smeg KSED 61 X“. You acquire with this product a 60 cm wide stainless steel decorative wall cover in the classic pyramid shape with attached fireplace, The blower has three speeds. A comparable performance and size can also be found in the wall cover „Franke FDC 602 XS“. Here, however, the chimney and hood are executed in a round shape. Both models can be used in both recirculation and exhaust air operation.

*Last update on 2018-07-29 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API