Ironing is a chore in many households today. The purchase of one steam ironing station can promise a relief at this point. With their help, the creased laundry can be smoothed much faster and easier. The preparation is not expensive and even if textiles have been left for a long time, then there is an optimal result even with strong wrinkles. In the steam ironing station The investment is particularly worthwhile if a large amount of laundry has to be handled on a regular basis. But also for people who always need freshly ironed shirts and blouses or for smaller households can be the alternative to the normal Ironbe benefited. Anyone who wants to be sure that the purchase is profitable, should think about what individual needs he has. Important is not only the size of the water tank or the performance, but also important are the nature of the soleplate, the amount of steam and the generated vapor pressure.

The differences from that steam ironand the steam ironing station

The steam ironing station is generally a further development of the steam iron. The separate steam station and the handpiece are connected to the firmly anchored hose and the steam station offers a water tank, The water tanks can be different in size and basically the capacity exceeds the capacity of the tanks of the classic steam irons significantly. Where the standard models take a maximum of 400 milliliters, the reservoir of the steam ironing station even 2 liters. With 400 milliliters, the amount of textiles is then of course limited and with 2 liters must be refilled much less frequently and in one swing can be processed large amounts of laundry. Compared to the normal steam ironing stations, the steam ironing station does not use the generated steam at the sole but already at the base station. From there, the steam passes through the hose at high pressure in the laundry. This also scissors, thick fabrics are penetrated easily.

The advantages of a steam ironing station and what is important for the purchase

Very positive is of course always the strong performance of a steam ironing station. Compared to the classic steam iron, it delivers three times more steam per minute. Due to the high amount of moist heat, there is the strong and rapid swelling of the fibers. The laundry can then be formed much easier in the episode. The high pressure that is used in the steam ironing station, the cost of ironing can even be reduced by up to fifty percent. It is often sufficient if the laundry only one side is ironed. The textiles are always freed from wrinkles, even in several layers. The capacity of the water tank is also an advantage of the steam ironing station. Larger quantities can be stored as with normal steam irons and thus can be ironed for over 3 hours without refilling. Without the disruptive interruption larger amounts of laundry can be processed. In classic models, the sole needs some heating. At the station, by contrast, the steam produced is available even at low temperatures. The delicate textiles can be smoothed much gentler. Because there is no water tank in the handpiece, the handpieces are usually much lighter than the classic steam irons. The difference can be up to 800 grams and this is noticeable in the load. There is hardly any pain in the arm even during the hours of use and also the sliding properties can be improved with the lower weight. When purchasing it is not difficult to find the right steam ironing station. Everyone only has to think about their own needs, because the devices meet different requirements. It is important, which quantities always have to be ironed and which material is processed. These factors are very important for the decision. The water tank must be larger, the larger the amounts of laundry are. The power given in watts is important and there are values ​​between 1500 and 3000 watts. Although more power is needed with powerful devices, heating up is faster. Also important are steam, steam and steam. The soleplate has different materials, such as ceramic, stainless steel and aluminum.