10 Best mirror suspension of 2019

  • Mirror size: diameter 46CM / thickness: 4cm / color: wrought...
  • HD imaging: Clear, bright mirrors that maintain true images,...
  • The frame scraping process and the hemp rope suspension...
  • Mirror size: diameter 46CM / thickness: 4cm / color: wrought...
  • HD imaging: Clear, bright mirrors that maintain true images,...
  • The frame scraping process and the hemp rope suspension...
  • Direct hanging on the car rearview mirror can be
  • Perfect gift for co-workers, teachers, freinds
  • Size: Diameter 7cm / Total length 28cm
  • 100% Brand New and High Quality Material: Metal
  • Size: As the picture shows
  • Use For: Car Decoration
  • Material:Selected imported environmental protection PC...
  • Dimensions:5.5-inch , Suitable for all iphone 7/8 Plus...
  • Perfectly fit:This slim fit case perfectly fit for iphone...
  • Picture Frame Hanger and Level Tool Suspension Measurement...
  • Built in vertical and horizontal levels,Metal pins mark...
  • Easy to use, saves time, walls & frustration, hanging...
  • vitos performance
  • GRAB & GO GLAM - From full glam to no-makeup makeup, keep...
  • GET READY ANYWHERE - Your makeup case train features a...
  • PROFESSIONAL DESIGN - Professional makeup artists and beauty...
  • GM
  • GM CHEVY CHEVROLET
  • Paperback
  • Simply place your picture frame or other item on the hook→...
  • EASY TO USE - Has built-in levels to ensure pictures are...
  • YELLOW HANG LEVEL: The Frame Hanging Tool works great with...

Mirror suspension guide

Mirror walls for the optical enlargement of the rooms

Mirror walls are used in a variety of ways, including to see themselves in it, but also as an optical space magnification. If a mirror wall should fall off the wall bracket, an anti-shatter foil protects against possible injuries. Therefore, mirror walls are very often hung in fitness centers, retirement homes or kindergarten gyms.

With the right one mirror suspension keeps the mirror bombproof

In order to prevent the mirror wall from falling down, there are important points to consider already during assembly. Among other things, it is important to know the size and weight of the mirror wall very well in order to secure them safely. In addition, the correct bracket should be taken. There are e.g. the classic mirror holder profiles. These are sturdy and discreet devices for large mirrors, but they can be seen from the outside. If you do not want the attachment to be visible, you should seek advice from a specialist. In particular, mirror elements made of high quality material and with a very high weight should be better secured by a professional and not on your own.

That’s how it works mirror suspension

To properly hang a mirror you need the right one Tooland enough time. The suspension itself is done in a few steps.
1. Wall preparation:
– For this, a wall should be selected, which has the necessary space for the mirror and is relatively free.
– Before starting, the space in front of the wall should be cleared. Also clean the wall before installing the mirror.
– With a balcony finder, the support beams must be found in the wall, so that the screws are screwed into these beams. Support beams can also be heard knocking against the wall. Then mark the outer edges where the mirror should hang.
– Now find and mark the middle between these two marks with the aid of a ruler.
2. Hang the mirror:
– With a tape measurefirst the middle of the mirror must be found. This is important to attach the bracket to the frame.
– To attach the mounting rings to the back of the mirror, mark two places on both sides approximately 15.24 cm from the top edge of the frame in the middle of the edge. Attach the mounting rings to these markings.
– Then attach the eyebolts to the lower edge using the same procedure as for the mounting rings.
– Take a long, sturdy wire twice and guide it through the mounting rings and the eye bolts. Some wire should be left over so that it can be connected to a reinforcement on the wall.
– Then wind a little wire around the suspension for reinforcement and secure with a pair of pliers.
– Lift the mirror to the desired position and mark the upper edge on the wall.
– With a spirit levelAt this mark, draw a horizontal line parallel to the ground. Then draw a line from the middle of the two support beams to the top line. Approximately Mark a point 12,7 cm from the top line on the center line of the support beams.
– Fix the screws of the suspension at these points. These must be able to hold more weight than the mirror.
– Carefully place the mirror in the correct position with the wire on the mounting screws and slowly release until they support the weight of the mirror.
– Finely level the mirror with a spirit level or the previously drawn line.

Tips for the mirror suspension:
1. If you want to hang a mirror professionally on the wall, it is better to have someone to help.
2. In many shops, finished kits for the mirror suspension offered. It is important to make sure when buying that they are suitable for the weight of the mirror. In addition, the instructions on the respective packaging should be followed.

*Last update on 2018-12-06 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API