10 Best Adhesive of 2019

  • Best for small and quick repairs
  • Bonds within 15 seconds
  • Patented control applicator allows mess-free and precise...
  • Impact Tough: Unique rubber particles increase impact...
  • Anti Clog Cap: Keeps glue from drying out. It's Gorilla...
  • Fill level is 15g.
  • Impact Tough: Unique rubber particles increase impact...
  • Anti Clog Cap: Keeps glue from drying out. It's Gorilla...
  • Fill level is 15g.
  • Repairs all leather, vinyl rubber and canvas shoes
  • Coats frayed shoelaces
  • Repairs damaged heels
  • Bonds nearly all household materials - metal, plastic,...
  • Patented side squeeze design maximizes control and...
  • Ideal for vertical surfaces and bonds that are subject to...
  • Great for single applications to Wood, Glass, Metal,...
  • Four, Single-Use tubes
  • Fast-drying liquid formulation
  • Two ways to dispense for greater control and versatility
  • Fine bristle brush for controlled coverage with less mess
  • Precision tip nozzle for quick, easy dispensing
  • ✅ PREMIUM ETHYL CYANOACRYLATE SUPER GLUE - LAB TESTED FOR...
  • ✅ EXTRA SUPPLIES: (2) applicator caps, (1) clog-free...
  • ✅ "WICKING TYPE" ADHESIVE: Great for woodturning finish,...
  • Best for small and quick repairs
  • Bonds within 15 seconds
  • Patented control applicator allows mess-free and precise...
  • Crystal Clear
  • Non-Foaming
  • Water Resistant

Adhesive remover guide

Who does not know the problem, the glue ends up accidentally where it does not belong. Then the question quickly comes up, how to remove this very stubborn glue again. A so-called Adhesive this can be the solution.

What will become of Adhesive manufactured?

On Adhesive consists of a mixture of different solvents, which are high-boiling.

How does an adhesive remover work?

Due to the special composition of solvents evaporates the Adhesive after application very slowly and reacts in this way with the cured adhesive. The adhesive is thereby dissolved or swells.

What draws one Adhesive out?

An adhesive remover not only removes cured adhesives, but also dissolves liquid adhesive residues.

How is the glue remover used?

The adhesive remover should be applied to the cured adhesive or the bonded part should be inserted in the adhesive remover. The glue is then loosened and swollen enough to be easily loosened.

How long is the exposure time?

The exposure time depends, for example, on the amount of cured adhesive, the temperature and the component geometry. You should try in advance at a small point, what is the optimal exposure time.

What types of glue remover are there?

First of all, there is the adhesive remover is liquid form, which is either applied directly to the cured adhesive or the soiled with adhesive product is inserted into the adhesive remover.

In addition, this adhesive remover is also in spray form. This spray is easily sprayed onto the adhesive and reacts with the adhesive as well as an adhesive remover in liquid form.

What else should you consider when using Adhesive Remover?

Before you use the adhesive remover on plastic parts, you should check whether the adhesive remover for plastic is even suitable. Furthermore, care should be taken to prevent static charge on the parts.

Care should be taken that the adhesive remover is not suitable for rubber, cork and linoleum.

For which materials are the adhesive removers suitable?

For example, the 847 Alfa Adhesive Remover is ideal for removing carpet glue, natural rubber glue, acrylate and hotmelt glue. Furthermore, it can also be used for cork, tile, parquet, carpet and wall glue. Due to the special mixture of the adhesive remover you can solve even double-sided adhesive tapes, adhesive strips, fly screen strips and very stubborn adhesive residue optimally and without residue.

In addition, there are also special adhesive remover for natural stone surfaces, such as granite, window sills, marble, slate, window frames, windows, cast stone, washed concrete, artificial stone, PVC and CV coatings.

The WEICON Sealant and Adhesive Remover removes both sealant and cured adhesive residue without leaving any residue behind. In addition, paints and colors are perfectly solved, so you can easily remove them. It can be applied to wood, glass, metal, ceramics, polypropylene, etc. Care should be taken that it is not used on PVC, synthetics and linoleum.

What should be considered in terms of safety?

It is advisable to provide adequate ventilation. If you have the opportunity, you should work immediately under a deduction.

Conclusion:

If a product has been soiled with glue, you do not have to give up hope that the product is now ruined. With special adhesive removers, it is possible to optimally dissolve both cured adhesives and liquid adhesive residues, as well as residues, and then remove them.

A variety of adhesive removers are commercially available. However, it is advised that it is urgently ensured that the adhesive cleaner is also suitable for the material to be processed. In the descriptions of the respective adhesive cleaner you can see exactly for which materials and surfaces this remover is suitable.

From a safety point of view, it is important to ensure that there is adequate ventilation during use as substances are released from the adhesive remover on the adhesive. However, it is recommended that you use the glue remover directly under a fume hood. So the fabrics are immediately „absorbed“.

No matter which adhesive remover one ultimately chooses, one will surely find the right one and soon the unwanted adhesive will be a thing of the past.

*Last update on 2018-12-06 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API