10 Best heat exchangers of 2019

  • 170,000 - 330,000 BTU CAPACITY: Depending on the...
  • 20 PLATES; 5"x12" 1 1/4" MPT: 20 brazed plates work to...
  • HIGH QUALITY STAINLESS STEEL 316L AND 99.9% COPPER: Lesser...
  • AGPTEK well male durable Aluminum Heat Exchanger Radiator...
  • Applicable to computer CPU,industrial variable frequency...
  • Using the black oxidation paint to increase the thermal...
  • Used Book in Good Condition
  • W. M. Kays, A. L. London
  • Publisher: Krieger Pub Co
  • Badgerpipe
  • Used Book in Good Condition
  • W. M. Kays, A. L. London
  • Publisher: Krieger Pub Co
  • High Quality:the plate heat exchanger are made of 316...
  • Max pressure :435 lbs per sq in;Plate Dimensions: 4.5 x 11.5...
  • High-efficiency Hookup:Threader make a easy, quick, flexible...
  • 170,000 - 330,000 BTU CAPACITY: Depending on the...
  • 20 PLATES; 5"x12" 1 1/4" MPT: 20 brazed plates work to...
  • HIGH QUALITY STAINLESS STEEL 316L AND 99.9% COPPER: Lesser...
  • 1" Copper Connections
  • Sekulic
  • Publisher: Wiley India
  • Edition no. 1 (01/01/1970)
  • 100,000 - 110,000 BTU CAPACITY: Depending on the...
  • 10 PLATES; 4"x12", 1" MPT: 10 brazed plates work to...
  • HIGH QUALITY STAINLESS STEEL 316L AND 99.9% COPPER: Lesser...

Heat exchanger advisor

General information about heat exchangers

Heat exchangers are suitable for a wide range of applications and are primarily used where excess energy is to be converted into heat. By installing a heat exchanger, the efficiency of a heating and hot water system can be increased and operated with lower energy consumption. Practically, one can heat exchangers are used wherever the generated heat is practically produced as a „waste product“ and simply escapes into the environment without further processing. The most common is one heat exchangers used in connection with water or processed in a private heating system in the house, as well as in a floor heating. But not only with water, but also with heated oils or other liquids, as well as with steam, air and warm gases is one heat exchangers helpful and converts the excess heat into valuable energy. This can in turn be used as heating heat or used for the temperature control of hot water or air or the other heating of liquids.

Function of heat exchangers

The medium for one heat exchangers is the substance that gives off heat and lets it be converted by a heat exchanger. The heat exchange always takes place between two media and requires a temperature difference. The most common is the use of heat exchangers in air-to-air, water-to-water or oil-to-oil heat diversion. This does not mean, however, that the function of heat exchangers is limited exclusively to a heat exchange between two uniform substances. With the excess heat from the Swimming poolcan be easily operated by means of a heat exchanger, the heating. For the user, this means that they use their existing resources optimally and do not give away valuable energy. In the annual accounts, the use of heat exchangers always characterized by reduced energy costs and thus by a saving. The two media pass through the heat exchanger with spatial separation and do not get through a common pipe or in a common space. The heating takes place by means of the highly conductive metal, without which, for example, during the heating of water, risks can arise through the second medium, for example a gas. Heat exchangers consist of an inner body of conductive metal and transfer the excess heat on the nature of the second substance in the device.

Advantages and disadvantages

The most obvious advantage of a heat exchanger is based on the saving of energy costs. Those who continue to use excess heat and do not simply dump it in the air can save a lot of money and valuable resources. In modern households with its own small powerhouse, one poolor in large companies with heat-generating processes in material processing, it is customary that a heat exchanger is used and used for the conversion of heat. The waste heat is used optimally and, moreover, the waste heat-emitting substance is protected against overheating. The overall process is much more economical and the bottom line is to save costs by using the heat exchanger for waste heat recovery and its conversion. Disadvantages can only arise if an exchange of heat is not possible or only so little waste heat prevails that no heat exchanger results in an optimization of the use of resources. This is the case, for example, if you want to use the waste heat of a tempered garden pond for the heating system and know that the heat release is only marginal and takes place only in the warm season. A precise calculation of the savings is possible and should be made by a person skilled in the art before deciding on a heat exchanger.

Helpful tips for buying

There are different heat exchangers with different capacities and possibilities. Not every heat exchanger is suitable for every application and for any substance from which waste heat is to be removed and associated with a cooling process. The best way to read reviews from other buyers and get through the reviews an overview of which heat exchangers with the best result convince and save a lot of energy. Furthermore, one can also read in forums or get advice from a specialist who calculates the amount of energy saved and thus can give a forecast for the cost savings. Finally, a price comparison for heat exchangers is helpful and can be done between different high-quality and high-performance models. When buying, you should focus primarily on a well-known brand and prefer a heat exchanger that convinces with a good rating and numerous customer opinions. Each heat exchanger saves energy and therefore costs, if it fits your own requirements and the prevailing circumstances.

*Last update on 2019-07-20 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API