Gelkamine
Gel chimneys have enjoyed increasing popularity for years. They spread comforting warmth, atmospheric light and also need no smoke exhaust. This distinguishes them mainly from conventional fireplaces.

Gel chimney – appearance, structure and function
The outer shape differs very little from the design of conventional fireplaces. You get both stainless steel fireplaces and models with tiles, marble or granite tiles. The design possibilities of the manufacturers are therefore virtually unlimited. This is mainly due to the very simple operation.

On Gelkamin consists in principle of a combustion chamber in which several cans with Brenngel are placed. These fuel cans are usually stored in a refractory container. To the fireplaceTo ignite, the burning gel in each box is set on fire with a suitable ignition aid. Brenngel is ethanol that has been rendered pasty by various thickeners. High-quality combustion gel burns usually odorless. A tin of 500 ml is enough for about 3-4 hours of burning time. Brenngel’s waste gases mainly consist of water vapor due to the high ethanol content. Therefore, care should always be taken to ensure adequate ventilation of the room.

Heating power of gel chimneys
Depending on the model of the fireplace, 500 ml of combustion gel produce a heat quantity of two to six kW. With that replaced Gelkamin not one Wood stove, which is operated with wood, however, he represents with this heating at least a relatively inexpensive form of additional heating, which provides in the room, unlike an electric auxiliary heating, for a comfortable atmosphere.

variants
Gel chimneys are now available in many different designs. You can set it up, hang it up and even place it outside. Due to the chimney-free operation, the design possibilities of the buyer are virtually unlimited.

Gel chimneys are not to be confused with fireplaces powered by bio-alcohol or pure ethanol. These fireplaces also require integrated electronics to control heating and ventilation.

Advantages and disadvantages of gel chamines
The advantages are obvious. Gel chimneys require neither a chimney nor a chimney sweep’s approval. In addition, no structural measures must be carried out. a Gelkamin You can place it where you want it. For example, if you want to set up a conventional wood-burning stove, you must do so near the building’s main chimney pits, or if you want to have flue pipes leading to it and heat shields on the wall or blanketAttach. At a Gelkamin that does not apply.

However, the fuel costs are slightly higher compared to those of dry firewood. A Geldose of 500 ml content costs depending on the source of supply currently between 3 and 6Euro. The gel is, as already mentioned, for a burning time of about 3 – 4 hours. Based on the month, you would the Gelkamin Consider as the main heating of the room, there would of course be high sums together. However, a gel chimney provides the convenient function of an auxiliary heater, which relieves or eliminates the need for central heating on and off to power them up in the transitions of the seasons. After all, that also costs money.

What to look for when buying a gel fireplace
When buying is essential to pay attention to the TÜV. This ensures safety and minimizing the risk of fire in the home. Also, the gel chimney should not be oversized, as it produces an increasing amount of water vapor with increasing heating power, which could cause mold in careless airing.

Demolition to the story
When the first gel chimneys came on the market is not known exactly. They developed from the original form of the open and the closed wooden fireplace. The mainspring for the further development of the conventional models was apparently increased heating costs, which urban dwellers could not compensate, as in the countryside, with the burning of firewood. In addition, the design possibilities without additional construction costs played an important role in the demand for gel quarries.