Loudspeaker systems are now offered in a wide variety of sizes, shapes and colors. In addition, of course, these also differ in their quality and the sound, so it is often very difficult to make a decision here.

Various speakerfor different purposes

With loudspeakers and the associated sound systems, a variety of uses are possible today. Because of this, one should think carefully before buying how to use the speakers. For example, are the speakers intended for the computer, the home theater, or „only“ for listening to music? Depending on different boxes in different numbers come into question, since they differ in terms of their channel technology from each other. This is often Dolby surround for home cinema systems and stereo for music systems. However, channel technology is important if you want to benefit from a good sound.

Speakers to listen to music and for home theater

If stereo speakers are required for listening to music, then it applies that a single speaker is sufficient for an existing mono technology, while two speakers must be present in a stereo playback. It looks quite different when you look for a Speaker System interested in the home theater. For example, Dolby Surround and Dolby 5.1 require multiple speakers that are distributed throughout the room for a better sound experience. Typically, such a sound system consists of five channels, which typically require three frontal and two surround speakers connected to the backs of the speakers. If you own Dolby 5.1, you also need a bass speaker.

What should you look for when buying speaker systems?

First of all, it should be noted that there are passive and active speakers. The difference here is that the active speakers already have an integrated one amplifierhave. For one thing, this is advantageous because it requires significantly less cable routing and, secondly, better sound quality is achieved. The longer the cable, the more the sound suffers. However, such speakers are usually much more expensive. Passive speakers are connected to an extra amplifier. When buying a speaker system, you should not only pay attention to how many watts such a box brings, but it is also advisable to consider their efficiency, which is given in decibels. It can be assumed that the higher the efficiency fails, the louder is the speaker. Also very important is the processing of the speakers, as this affects the sound quality. In addition, you should of course not take it to check the speaker sound. The best thing to do is to take a look at the speakers, because the more speakers there are, the clearer and clearer the sound. Furthermore, the ohm values ​​given by the Greek symbol „omega“ are very important. The ohms represent the resistance. The output resistance of a loudspeaker must be the same as the amplifier. If the value at the loudspeaker is lower than the value of the amplifier, both devices can suffer significant damage. Conversely, it is almost the same. On the other hand, if the speaker resistance is too high, it is possible that the speaker will be damaged at higher volumes.