10 Best processor fan of 2019

  • Excellent component cooling
  • Asymmetrical design for high compatibility
  • Dual NF-A15 PWM 140mm fan setup
  • Official Genuine Intel Branded Product
  • Supports Motherboard Socket: 1156 / 1155 / 1151 / 1150 -...
  • Aluminum heatsink - Pre-applied thermal paste
  • Aluminum Extrusion Design
  • Low-profile Gravity i2 has a perfect ratio aluminum...
  • Compatibility: Intel Core i7/i5/i3. Socket LGA1156/1155
  • Supports Intel Socket 130W LGA20XX/LGA1366/LGA115X/LGA775...
  • 120x120x25mm PWM fan with blue LED
  • 4 sintered powder heatpipes directly touch the CPU surface
  • Excellent component cooling
  • Asymmetrical design for high compatibility
  • Dual NF-A15 PWM 140mm fan setup
  • Supports Motherboard Socket: 1150/1155/1156
  • 3.5-inch (90 mm) fan - Aluminum heatsink
  • DC 12V, 0.17A
  • EXCELLENT COOLING PERFORMANCE: The unique heatsink design...
  • LOW NOISE: Complimented by Hardware Secrets for being the...
  • MULTI-COMPATIBILITY: The Freezer Xtreme features a wide...
  • Intel Fan Heatsink Assembly, Air Cooling, Supports the...
  • Design that delivers high availability, scalability, and for...
  • Made in China
  • 600 - 2,000 RPM (PWM) +/- 10%
  • 24.9 - 82.9 CFM +/- 10%
  • 4 Direct contact heatpipes / Aluminum fins
  • Intel Socket 1156 Aluminum Heat Sink and Fan General...
  • 3.5-inch (90 mm) fan DC 12V, 0.17A Supports Intel Core i3...
  • 4-pin power connector (12-inch length, approximate)...

Processor fan guide

What is a processor fan?

On processor fan is also referred to as a processor cooler. The device consists of the heat sink and the fan and provides the necessary abolition of heat, which automatically arises when working the processor. Of the processor fan works via a power and control connection, which is available in three different versions. The differences of the different models can be found in the control. The 2-pin connector contains two cables. A cable can be used for the ground and the second cable for the supply voltage. The speed of the processor fan does not flow into the controller.
The second form is the 3-pin connector, which contains one pin each for the supply voltage, the ground and the tacho signal. The speed does not enter the control. The third and the last form is the 4-pin connector, which was invented in 2004 and launched on the market. For the 4-pin connector, the speed controller was built into the fan. This can determine the temperature of the controller via a PWM signal. The control signal and the supply voltage are routed on different lines. The 4-pin connector allows flexible cooling of the processor fan.

How is the processor fan cleaned?

Everyone processor fan should be freed of dust and dirt at regular intervals and thoroughly cleaned. When in the processor fan already has accumulated a lot of dust, then he can no longer perform well and cools accordingly less. The dirt resembles an insulation layer. The fins are getting hot and the fan is starting to spin faster and faster to maintain the cooling performance of the processor fan. Due to the fast turns of the processor fan makes more noise and can be distracting. Regular cleaning prevents this process and prevents loud noises. Before starting the cleaning, the processor fan should be carefully disassembled. For laymen and beginners, a specialist can be commissioned, since the incorrect installation and removal can cause serious damage to the processor fan. The fan must be disconnected from the cooling fins after removal. Thereafter, the cooling fins should be blown out with compressed air. For this work, a fine and long-bristled brush can be useful. The blades of the fan need to be cleaned as they can be just as dusty. Thereafter, the thermal grease can be removed and replaced with new thermal grease. After cleaning, the processor fan can be reassembled. Now the processor fan should work perfectly and quietly.

Which processor fan can be recommended?

There are various processor fans available in the trade. They differ in terms of performance, design and function. The different models were equipped with numerous details.
A popular and modern processor fan includes the Arctic Freezer 13 processor fan and processor cooler. Due to the 45-fin body, the transferring cooling capacity can be up to 200 watts. The high quality features of the processor fan include 4 heatpipes and the MX4 thermal grease already applied. The device is suitable for any current high-end CPU. The Arctic Freezer 13 processor fan works very quietly and produces hardly any noise. It is compatible with the AMD AM3 +, AM3, AM2 +, AM2, FM2, FM1, 939, 754 Intel 755 and 1150 (Haswell), 1155, 1156, 1366 models. The assembly can be carried out easily and quickly by laymen. The fastening system was equipped with modern and high quality push pins. The weight of the item is about 699 grams and the product dimensions are 12.3 cm x 9.6 cm x 13 cm. The fan speed can reach between 600 and 2000 revolutions per minute. The voltage can be up to 12 volts.

Another very successful and popular model is the Arctic Alpine 64 Plus processor cooler. It has been equipped with unique details and features and works very quietly. The unit has a unique cooling performance and has been equipped with an aluminum heat sink. Special features include ready-to-apply MX4 thermal grease and 92mm PWM fans, as well as the push-pin mounting system that is safe to move. The Arctic Freezer 13 processor fan is compatible with the AMD socket: FM2 + / FM2 / FM1 / AM3 + / AM3 / AM2 + / AM2 / 939. The weight of the item is 91 grams and the product dimensions are 11.5 cm x 10 cm x 7.5 cm. The device is available in black and silver color.

*Last update on 2018-12-06 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API