The Paint protection film prevents scratches and color changes

Paint surfaces look shiny and high quality. Unfortunately, they are relatively sensitive to chemical and mechanical effects and can therefore be damaged quickly. Paint protection films counteract this problem and protect the surface against sun rays, stone chipping and scratching. The „Paint Protection Film 8591 from 3M“ is conformable and washable. According to the manufacturer, however, it is not resistant to programs with hot wax, which must be taken into account when selecting the washing programs. Bonding takes place by means of the squeegee, through which you remove air bubbles under the film. The smooth and perfect fit is important so that the transparent film is not visible. Paint protection films are applied to automobiles, among others. Especially the sill is susceptible to damage as it may cause scratches during loading and unloading. The Paint protection film is cut to the appropriate size and receives the perfect look of the car and the vehicle value. Further areas of application are door sills and handles. Over time, it comes to signs of wear, which you prevent through the protective films. 3M offers transparent as well as colored foil. The paint is not only protected, small existing scratches can be covered. Foils can be applied over existing stone damage, but the dents remain visible. The conspicuousness may, however, be reduced, depending on the severity of the damage, the particular location on the vehicle and other circumstances. However, the main purpose of the slides is to prevent future damage. Not all scratches can be avoided, but the films significantly reduce the risk. In everyday life it quickly comes to scratches, for example, by rings on the fingers, fingernails or keys. They look ugly and reduce the vehicle value. The advantages of Paint protection film are the high impact, the possibility of later removal and the relatively simple attachment.

The application of Paint protection film

When installing the film, you must always observe the manufacturer’s exact instructions. In general, the protection should not be applied to freshly painted vehicles or new vehicles. After a waiting period of about 4 to 6 weeks, the attachment is possible because now the fresh paint is resistant. If protective wax or polish has been applied to a vehicle part, the initial adhesion is reduced. It is important that you thoroughly rake the surface so that proper adhesion can be established. Paint protection films can in many cases be removed without leaving any residue; a layer of wax and polish can further simplify removal. The individual products differ in terms of resistance and redetachability. Simple versions leave adhesive residues. Another selection criterion is extensibility. A high extensibility indicates an elastic foil film. Rockfalls can be cushioned. Differences exist with the offers also in the sales form. It can be by the meter or tailor-made. „Perfect fit“ means that the films were cut to the dimensions of the selected vehicle type. The „Unitec 73730 paint protection film“ is offered in the size 20 cm x 150 cm and designed especially for the requirements for loading edge protection. According to the manufacturer, the film can be removed without residue and can therefore be replaced if necessary. Most foils are only suitable for painted surfaces. They must not be applied to uncoated plastics, such as headlamps or the interior trim.